Best Price Plastic Raw Material Virgin Pet Chips Plastics Pet Resin Granules

• Customization: Available
• Feature: Engineering Plastics
• CAS No.: 25038-59-9
• Model NO.: Pet Resin
• Formula: C8h6o4.C2h6o2
• EINECS: 25038-59-9
• Material: Polyethylene Terephthalate/PET
• Usage: General Plastics, Engineering Plastics, Specialty Plastics
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Blow Molding
• Color: White
• Grade: Bottle Grade
• IV: 0.8+
• Application: Fibers, Bottles
• Package: 1100kg/Bag
• Transport Package: Bag
• Specification: cz-302, cz-318, cz328
• Trademark: Jade
• Origin: Jiangsu
• HS Code: 3907619000
• Production Capacity: 100000000

Product Description

Product Description

 

Product Description:
PET material, commonly known as polyester resin, is the most important variety of thermoplastic polyester. Its physical properties are milky white or light yellow highly crystalline polymer with smooth and shiny surface. Creep resistance, fatigue resistance, abrasion resistance, low wear and high hardness, with the greatest toughness among thermoplastics.

Packing:
1100kg/bag 22tons/container

Product Parameters

Item	CZ-302	CZ-318	CZ-328
Intrinsic viscosity IV(dl/g)	0.803	0.835	0.869
Acetaldehyde content AA(ug/g)	0.8	0.4	0.4
Color b value	-1.3	-1.7	-0.2
L value	83.4	84.1	85
Diethylene glycol content  DEG(%)	1.45	1.44	1.43
Terminal hydroxyl content -COOH(mmol/kg)	27	21	25
Melting Point(ºC)	244.7	243.6	244.7
Powder(mg/kg)	16	16	13
Color Granules(grain/500g)	No
Moisture(%)	0.1	0.1	0.1
Density(g/cm³)	1.4	1.4	1.4
Ash(%)	0.01	0.01	0.01
Crystallinity(%)	54	53	54
Weight/100PCS(g)	1.53	1.5	1.54
Appearance	White particles, no peculiar smell, peculiar smell, foreign matter
Application	Water bottle	Lecythus	Carbonated drink bottle

Features:
1. Good electrical insulation performance, less affected by temperature, but poor corona resistance.
2. Non-toxic, weather resistance, good stability against chemicals, low water absorption, resistant to weak acids and organic solvents, but not resistant to hot water soaking, not alkali resistant.
3. The glass transition temperature of PET resin is high, the crystallization speed is slow, the molding cycle is long, the molding cycle is long, the molding shrinkage rate is large, the dimensional stability is poor, the crystallized molding is brittle, and the heat resistance is low.
4. The heat distortion temperature and long-term use temperature are very high among thermoplastic general engineering plastics.
5. Because of the high heat resistance, the reinforced PET is immersed in a solder bath at 250°C for 10 seconds, and it hardly deforms and does not change color. It is especially suitable for the preparation of electronic and electrical parts for soldering.
6. The bending strength is 200MPa, the modulus of elasticity reaches 4000MPa, the creep resistance and fatigue resistance are also very good, the surface hardness is high, and the mechanical properties are similar to thermosetting plastics.

Application

Application:
1. PET is mainly used for fibers, and a small amount is used for films and engineering plastics.
2. Another use of PET is blow molding products, which are used in various bottles, such as water bottles, carbonated beverage bottles, and oil bottles.

Company Profile

Certifications

Packaging & Shipping

 

FAQ